# USPE Roller-Transfer Cadaver Carrier

Specification and configuration review | Revision C30-R1 | October 29, 2026.
This document accompanies original editable CAD studies; it is not an operating manual or fabrication release.

An in-line roller carrier offered with requested tray widths or as chassis only. This CAD set illustrates the 23-inch tray configuration, not every selectable tray or chassis-only option. Final supplied equipment is defined by the accepted quotation and approved model-specific drawings.

## Specification status

| Item | Current review position |
|---|---|
| Identity | USP-6000-A-NA-T family; illustrated variant USP-6000-A-NA-T-23. |
| Native options | 23-inch, 27-inch and 30-inch tray options, plus chassis only. Each option retains its existing native SKU. |
| Overall envelope | Native-listed planning dimensions: 79 × 27.25 × 35 inches. These conflict with reference dimensions and require a model-specific approved drawing. |
| Transfer deck | In-line nylon roller arrangement and retaining flip latch requested. Roller centers, axle details and latch engagement remain subject to review. |
| Tray | The illustrated tray is 23 inches wide. Tray length, edge profile, supports, drain and alternate-width fit require approval. |
| Frame | Native listing requests 1.5-inch square stainless tubing. Grade, gauge and finished construction require the accepted schedule. |
| Wheels | Four eight-inch casters are listed; actual braking and directional-lock functions require verification. |
| Slope, load and compatibility | Permanent drainage slope is requested, but no slope value, load rating or transfer-system compatibility is established here. |

The CAD drawing labels report the modeled envelope, including protruding hardware where shown. They do not resolve contradictory source dimensions or establish manufacturing tolerances.

## Model and configuration choices

- **USP-6000-A-NA-T-23**: 23" Tray.
- **USP-6000-A-NA-T-27**: 27" Tray.
- **USP-6000-A-NA-T-30**: 30" Tray.
- **USP-6000-A-NA-CO**: Chassis Only (No Tray).

Options are separate configuration requests, not automatically included equipment. Use the selected SKU when requesting a quotation; the accepted written quote defines the supplied scope and price.

## Matching CAD documents

- **Main view**: `../images/USP-6000-A-NA-T-23-hero-cad-c30.jpg`.
- **Detail view**: `../images/USP-6000-A-NA-T-23-detail-cad-c30.jpg`.
- **Three-view drawing**: `../drawings/USP-6000-A-NA-T-23-orthographic-cad-study.jpg`.
- **Editable assembly**: `../scenes/USP-6000-A-NA-T-23-cad-c30.blend`.

All views belong to the same illustrated assembly. Original CAD is not a production photograph or an as-built record.

## Configuration approval checklist

- Resolve overall dimensions and transfer elevations against the selected tray.
- Verify roller contact, end restraint, drain clearance and any bridging gap.
- Approve each alternate tray width separately; the 23-inch drawing is not universal.

Record the selected SKU, orientation, included components, approved drawing revision and exclusions together. No capacities, certification, country of origin or universal compatibility claims are supplied by this review.

## Required installation and operating documents

- **Receiving and installation**: Obtain actual equipment mass, authorized handling points, floor/anchorage requirements, clearances and the selected utility schedule.
- **Operation**: Obtain validated model-specific controls, pre-use inspection, loading/transfer procedure, locks, permitted movement, stop/shutdown behavior and staff training requirements.
- **Cleaning and service**: Obtain compatible cleaning agents, concentrations, contact times, isolation procedure, maintenance intervals and a traceable parts schedule for the supplied assembly.
- **Acceptance**: Record serial number, purchase order, approved drawing, reviewer signature and facility acceptance before operational release.

These requirements are not substituted with generic instructions from a different model. Do not use this review document to install, operate, modify or certify equipment.

## Release record

Engineering approval: pending. Manufacturing approval: pending. Operating-manual release: pending.
Visual review of the CAD does not change those approval states.


## Draft drawing references

- [main cad study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/usp-6000-a-na-t-23-main-cad-study-20261029.jpg)
- [detail cad study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/usp-6000-a-na-t-23-detail-cad-study-20261029.jpg)
- [orthographic study](https://www.mymortuarycooler.com/cdn/shop/t/401/assets/usp-6000-a-na-t-23-orthographic-study-20261029.jpg)
