USPE Low-Profile 4-Tier Morgue Cadaver Rack

Catalog specification reference · Model USPE-CR-LP4-SL-78X23

Generated from the current product record on October 28, 2026. This is not an approved engineering, fabrication or installation drawing.

Return to product Request current documentation

Listing tables and planning references

Model	USPE-CR-LP4
Design status	Proposed configuration; not an approved production specification
Target overall height	60 inches, proposed planning target only
Target footprint	83 × 29 inches, proposed planning target only
Tier spacing	To be resolved against tray depth and required body clearance
Load rating	Not established; written engineering confirmation required
Trays / lift	Separate compatibility review

Tray selection	Outside tray dimensions	Tray gauge / published load	Rack request
23-inch width	78 L × 23 W × 2.75 H inches	18 gauge / 300 lb	Rack sized and rated for this exact tray; final drawing required
27-inch width	78 L × 27 W × 2.75 H inches	16 gauge / 400 lb	Rack sized and rated for this exact tray; final drawing required
30-inch width	78 L × 30 W × 2.75 H inches	14 gauge / 500 lb	Rack sized and rated for this exact tray; final drawing required

Existing model documents

Request the current model-specific specification sheet, drawing or operating manual with your equipment scope. No unreleased file is presented as an approved installation or fabrication document.

Configuration and scope review

Confirm the ordered configuration, dimensions, load rating, interfaces, utilities, clearances and included accessories against the accepted written quote and applicable model documentation. Reference specifications do not establish compatibility, certification, current availability or manufacturing approval. Optional items and custom work are not included unless expressly identified in the accepted scope.

https://www.mymortuarycooler.com/products/uspe-low-profile-four-tier-morgue-cadaver-rack
Equipment documentation: cool@mymortuarycooler.com · 1-888-792-9315