Low Profile Powered Crematory Lift
Review the low starting deck, raised working height and approved platform for a lower transfer point. This is a powder-coated lift, not a stainless-frame model.
Configuration-based RFQ
Review equipment details
ACHUSPE equipment
Model: USPE-1035-02
Quote only
Request a quote for your selected model and configuration.
Choose options, add your quantity, then review your list and send one request. Custom requirements are confirmed in the written quote.
A 304 stainless steel dissection table (USPE-1035-02) with a lift-open stainless cover for case privacy and splash containment.
The covered design solves two problems on its own: case privacy in multi-station rooms and splash containment during dissection. The vented variant ( USPE-1035-06DT-V ) adds vapor capture for formaldehyde-heavy workflow. If grossing or fixative-wet specimen work happens at this table, specify the vented unit.
University medical school anatomy departments run the USPE-1035-02 as an anatomy dissection table medical school workstation for gross anatomy teaching where room HVAC handles vapor control, the covered design keeps prosection cases dignified between lab sessions without per-table ventilation cost. Veterinary programs use the same unit as an entry veterinary necropsy table.
| Design | Covered dissection table, non-vented |
|---|---|
| Surface | 304 stainless steel, dissection-grade |
| Cover | 304 stainless, lift-open |
| Drainage | Integrated perimeter waste channel |
The 02 is the covered table without ventilation; the 06DT-V adds integrated exhaust vapor capture.
Yes, gross anatomy teaching where room HVAC handles vapor control, with covered prosection dignity between sessions.
Yes, same unit, entry tier, all species.
Every U.S. Pathology Equipment model can be built to your specification. Common changes include length, width and working height, load capacity, left or right hand orientation, sinks, plumbing and ventilation, and drawer or door layouts. Custom powder-coat finishes are available on frames, bases, cabinets and exterior panels to match your facility colors, alongside Type 304 stainless steel work surfaces. You approve a shop drawing before fabrication starts.
Quote only. Every unit is built to order and priced on a formal written quote.
We supply hospitals and health systems, medical examiner and coroner offices, county, state and federal agencies, VA and military facilities, universities, medical schools and research labs.
Request a quote or bid package · Purchase order policy · Request a W-9 · Full-room equipment packages · Bid and submittal documentation · Call 1-888-792-9315
Covered Cadaver Dissection Table · Stainless Steel Dissection Table with Drawers · Vented Downdraft Dissection Table with Cover · Two-Body Rotating Dissection Table · Manual Immersion Dissection Tank · Electric Immersion Dissection Table · Chatillon Mechanical Hanging Autopsy Scale · Autopsy Sink Station with Center Sink · 4-Body 2-Door Morgue Cooler
Shop Dissection tables, immersion dissection tables, anatomy lab tables, All U.S. Pathology Equipment. Planning a new facility? See our medical examiner facility design guide.
Model USPE-1035-02 is one of 2 USPE autopsy dissection table configurations. Compare it with Vented Covered Autopsy Dissection Table (USPE-1035-06DT-V). Each model page lists its own options, drawings and documents, and any of them can be added to the same quote. Browse all USPE equipment.
Anatomy lab and autopsy-room handling
A dissection table is one part of the handling route. Match the tray support, transfer direction, retaining stops and working height before pairing it with a lift or rack. A roller-equipped table can support a different transfer method from a fixed recessed top or an immersion tray; rolling transfer is not a standard feature on every model.
Review the low starting deck, raised working height and approved platform for a lower transfer point. This is a powder-coated lift, not a stainless-frame model.
Configuration-based RFQ
Review equipment details
Request the 304 stainless lift configuration for your medical or autopsy workflow. Specify the loading direction, tray and required lift range.
Configuration-based RFQ
Review equipment details
Compare 23″, 27″ and 30″ tray options with the actual support opening. Width, gauge and load rating vary by selected tray.
Configuration-based RFQ
Review equipment detailsFor a complete room, include storage racks and lifts, trays and HD body boards, dissection tables and immersion equipment in the same planning request. Accessories are separate unless the accepted quotation includes them.
Use the document for your exact model and revision. A reference sheet or blank sign-off form is not an approved project submittal.
Request the current model-specific specification sheet, drawing or operating manual with your equipment scope. No unreleased file is presented as an approved installation or fabrication document.
View / print this model's catalog specification reference. The reference is generated from the current listing; it is not a substitute for a released engineering drawing.
Values below are references recorded for this listing, not a new classification determination. Missing or unverified information must be confirmed for the exact configuration and purchasing system.
Reference classifications for RFQ, bid, grant and purchase-order preparation. Codes, model numbers and any GSA Schedule SIN are different identifiers, not certifications; this panel does not assign a SIN or imply a contract award, set-aside status, government approval or universal regulatory compliance.
Request exact-model confirmation · Submit an RFQ or purchase order · Government buyer desk
Optional analytics cookies help us improve AMC.Analytics cookies? Policy