USPE equipment

Pathology, Morgue & Laboratory Refrigeration Systems

Multi-bay vault morgue coolers (2-15 bay), walk-in morgue coolers & freezers, pathology lab refrigerators & 304 SS cadaver storage racks from USPE.

Pathology, Morgue & Laboratory Refrigeration Systems

Fabrication14–16 Ga Type 304 & 316L stainless steel, TIG-welded
OSHA Air QualitySupports 0.75 ppm PEL / 2.0 ppm STEL formaldehyde control
MEP Submittals115V/20A GFCI, CFM exhaust & plumbing rough-ins
ProcurementHospital POs, county bids, GSA & CSI Div. 11/12

Morgue Refrigeration, Multi-Bay Vault Coolers & Pathology Lab Cold Storage

Reliable cold storage protects forensic evidence integrity, surgical specimens, reagents, and donor tissue around the clock. USPE and American Mortuary Coolers engineer factory-direct refrigeration systems spanning 2-bay to 15-bay individual-door morgue vaults, custom walk-in morgue coolers and freezers (6×8 to 20×40+), pathology laboratory & specimen refrigerators, and high-density Type 304 stainless steel cadaver storage racks—delivered nationwide with published specifications, alarm monitoring options, and rapid PO fulfillment.

Morgue & Laboratory Cold-Storage Architecture Matrix

Refrigeration System Capacity & Temperature Range Key Structural & Mechanical Specs Explore Live Catalog
Multi-Bay Vault Morgue Coolers 2 to 15 individual body bays; 36°F–40°F (or 0°F–10°F freezer) Individual magnetic-gasket doors minimize thermal loss; telescoping telescopic or roller slide trays; front or side load Multi-Bay Vault Coolers (18 models)
Walk-In Morgue Coolers & Freezers 6 to 120+ body positions; standard cooler, dual-temp, or deep-freeze 4 in. foamed-in-place urethane panels (R-32), cam-lock construction, top-mount or remote condensing units, bariatric doors Walk-In Morgue Coolers (130 models)
Pathology & Laboratory Refrigerators Undercounter to 72 cu. ft. reach-in; 2°C–8°C microprocessor controlled Glass or solid stainless doors, digital temp logs, dry-contact BMS alarm outputs for hospital compliance Laboratory Refrigerators
Cadaver Storage Racks & Body Trays 2-tier to 5-tier end-load, side-load & cantilever racks All-welded Type 304 stainless steel or HD galvanized steel; sealed ball-bearing rollers; 23–36 in. bariatric trays Cadaver Storage Racks
Mass-Fatality & Overflow Surge Coolers 12 to 48+ rapid-deploy positions Modular insulated panels and cantilever racks engineered for county emergency surge and hospital overflow Surge & DMORT Coolers

Engineering Specs That Prevent Costly Morgue Cold-Room Failures

  • Individual-Door Vaults vs. Walk-In Coolers: Choose a multi-bay vault cooler when floor space is tight, zero-walk-in access is preferred, or pathologists open doors dozens of times daily without dumping cold air from the entire room. Choose a walk-in morgue cooler paired with SSR stainless roller racks when storing 8+ decedents, bariatric cases, or rolling stretchers directly inside.
  • Remote vs. Self-Contained Condensing Units: In tight interior hospital basements or conditioned forensic suites, specifying a remote condensing unit removes compressor heat and noise from the autopsy room and prevents HVAC overload.
  • Continuous Temperature Logging & Alarms: Hospital Joint Commission, CAP, and NAME accreditation require verified temperature monitoring with audible/remote alerts—available across USPE vaults, walk-ins, and laboratory specimen refrigerators.

Related Morgue & Lab Refrigeration Planning Guides

Frequently Asked Questions

What temperature should a hospital morgue or medical examiner cooler maintain?

Standard positive-temperature morgue coolers operate between 36°F and 40°F (2°C to 4°C) to preserve remains without freezing tissue. Long-term forensic holds, unidentified decedents, and fresh-frozen anatomy donors require morgue freezers rated at 0°F to 10°F (-18°C to -12°C).

When should a pathology department choose a multi-bay vault cooler over a walk-in morgue cooler?

Multi-bay vault coolers are ideal for 2-to-12 body hospital morgues where individual bay doors preserve temperature stability and maximize space along a single wall. Walk-in coolers become more space- and cost-efficient once capacity exceeds 8 to 12 bodies or when bariatric rolling cots must wheel directly inside.

Do USPE cadaver storage racks work with hydraulic body lifts and standard body trays?

Yes. USPE 2-to-5 tier end-load, side-load, and cantilever racks are built to match standard 23-inch, 27-inch, and bariatric 32-to-36-inch stainless steel body trays and align cleanly with hydraulic mortuary lifts and transfer carts.

Need room drawings, rough-in specs, or a consolidated USPE quote?

Send your floor plan or equipment schedule to our institutional spec desk for factory-direct pricing and CAD submittals.

Request a USPE Quote

Project photographs

Installed stainless steel casework

Sink cabinets, open knee space and glass-front storage, photographed in the room.

Installed stainless steel sink cabinets, open knee space and glass-front storage in a laboratory room; actual project photograph
Stainless sink cabinets and glass-front storage. Actual project photograph.
Four stainless steel glass-front storage cabinets installed together in a laboratory room; actual project photograph
Glass-front storage cabinets installed together. Actual project photograph.