Your cart is empty
Browse mortuary coolers, freezers, cots and pathology equipment, then add the models you want to order or compare.
Shop by category
ACHUSPE PET · Veterinary necropsy and animal science
Compare necropsy stations, service sinks, flushing fixtures, water controls and integrated casework. Select an exact model, add relevant options and bring the equipment into one quote.
University teaching laboratories, veterinary diagnostic teams and animal-science research facilities can coordinate work positions, storage and cold-storage connections in the same project. Cleanroom-project requirements must be specified and reviewed; no cleanroom certification is implied.
11 families · 57 exact model configurations
Water controls
Coordinate a countertop water-control assembly with the animal-science sink, rinse outlet and utility schedule. Specify filler-spout handedness before ordering; this is not a freestanding sink.
3 configurations · Review models and quote
Service sinks
Organize the collection-sink position within an animal pathology work area. Review the collection route and permitted waste stream with the facility team before specifying drainage.
2 configurations · Review models and quote
Service sinks
Coordinate a wall-mounted utility and sink position for a veterinary necropsy room. Keep the supporting wall, service access and fixture arrangement on the approved room drawing.
2 configurations · Review models and quote
Service sinks
Provide a foot-operated hot and cold water position beside the animal-science work area. The station supports hands-free fixture control; it does not replace a facility infection-control program.
1 configuration · Review models and quote
Necropsy stations
Plan animal specimen preparation around a central sink, perforated specimen shelf and adjacent working positions. Confirm the usable specimen envelope and any ventilation request for the actual project.
1 configuration · Review models and quote
Necropsy stations
Place the sink on the right of the veterinary necropsy workstation to match the room layout. Review the approach to the sink, instrument drawer and adjoining casework without assuming transfer-equipment compatibility.
2 configurations · Review models and quote
Necropsy stations
Place the sink on the left of the veterinary necropsy workstation to match the room layout. Coordinate instrument staging and service access with the neighboring animal-science cabinets.
2 configurations · Review models and quote
Service sinks
Coordinate an integral sink, continuous rinse, water controls and spray hose in one animal-science service station. Select the eyewash arrangement, drain option and additional receptacle configuration for written review.
30 configurations · Review models and quote
Flushing stations
Plan a dedicated flushing-fixture position for an animal necropsy suite. The vitreous china bowl, splash cover and service cabinet form a utility station; permitted waste and tissue-disposal routes require facility approval.
10 configurations · Review models and quote
Necropsy stations
Request the existing sink-equipped table platform for a dedicated animal-science necropsy arrangement. Select the documented left- or right-hand sink; specimen support, capacity and the proposed necropsy application require written review.
2 configurations · Review models and quote
Casework packages
Coordinate an animal necropsy station with integrated cabinet storage and water-control plumbing. Build an itemized room schedule so the station, cabinet sizes, finishes and installation responsibilities remain clear.
2 configurations · Review models and quote100% American-made laboratory casework, with standard cabinet models and fully custom builds. Choose the standard stainless appearance, powder-coated stainless steel or powder-coated steel, then specify body and front colors, glass, door style, hinges and pulls.
Build a dedicated animal-science casework schedule. Request a free planning drawing with your quote; confirm final grade, gauge, fabrication, utilities and component fit in the approved project scope.
USPE PET · Water controls
Coordinate a countertop water-control assembly with the animal-science sink, rinse outlet and utility schedule. Specify filler-spout handedness before ordering; this is not a freestanding sink.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Coordinate a countertop water-control assembly with the animal-science sink, rinse outlet and utility schedule. Specify filler-spout handedness before ordering; this is not a freestanding sink.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Base plate | 18″ W × 14″ D heavy-gauge stainless steel, radiused corners |
|---|---|
| Mounting holes | 4, on 16″ × 12″ centers |
| Hot and cold supply | ½″ NPT each |
| Drain | 1½″ to a standard P-trap; 2″ on request |
| Outlets | OUT 1 table rinse; OUT 2 tall filler to the compatible filler equipment |
| Aspiration | Hydro-aspirator with vacuum breaker, clear-sight drain and air gap; dedicated cold water valve; water wand |
| Countertop | Drop-in cutout; counters as shallow as 18″ deep |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Quote the documented rinse hose, water wand and aspiration tubing by the existing assembly reference. Confirm bore, length, connection and replacement fit; do not substitute tubing between functions.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-WCU planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Service sinks
Organize the collection-sink position within an animal pathology work area. Review the collection route and permitted waste stream with the facility team before specifying drainage.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Organize the collection-sink position within an animal pathology work area. Review the collection route and permitted waste stream with the facility team before specifying drainage.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
Overall dimensions, connection locations and the final included fixture schedule are confirmed by project drawing; no unverified dimensions are substituted.
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Coordinate the collection route, splash management and required cabinet storage. Specify permitted waste and final plumbing before adding fixtures.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-COL planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Service sinks
Coordinate a wall-mounted utility and sink position for a veterinary necropsy room. Keep the supporting wall, service access and fixture arrangement on the approved room drawing.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Coordinate a wall-mounted utility and sink position for a veterinary necropsy room. Keep the supporting wall, service access and fixture arrangement on the approved room drawing.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Height | 71" |
|---|---|
| Length (left to right) | 30" |
| Depth (front to back) | 24.5" |
| Sink basin | 12" × 16" × 8" |
| Material | 304 stainless steel |
| Power | 110V with GFCI-protected receptacle |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Review the supporting wall, mounting pattern, utility access and adjoining storage. A freestanding support or separate table is not included unless itemized.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-WM planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Service sinks
Provide a foot-operated hot and cold water position beside the animal-science work area. The station supports hands-free fixture control; it does not replace a facility infection-control program.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Provide a foot-operated hot and cold water position beside the animal-science work area. The station supports hands-free fixture control; it does not replace a facility infection-control program.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Height to Backsplash | 40.00" |
|---|---|
| Height to Countertop | 36.00" |
| Width (L–R) | 30.00" |
| Depth (Front–Back) | 24.00" |
| Material | 304 Stainless Steel |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Coordinate foot-control clearance, supply connections, splash protection and adjacent storage. Include the actual fixture and drain requirements.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-FPS planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Necropsy stations
Plan animal specimen preparation around a central sink, perforated specimen shelf and adjacent working positions. Confirm the usable specimen envelope and any ventilation request for the actual project.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Plan animal specimen preparation around a central sink, perforated specimen shelf and adjacent working positions. Confirm the usable specimen envelope and any ventilation request for the actual project.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Construction | 304 stainless steel |
|---|---|
| Sink | Large center sink with dissection rinse & control valve |
| Sink placement | Left, right, or center |
| Aspirator | Hydro aspirator with vacuum breaker |
| Faucet | Gooseneck, hot & cold |
| Ventilation | Vented or non-vented |
| Shelf | Large perforated specimen shelf |
| Electrical | GFCI receptacle with waterproof cover, overhead light |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Review the perforated specimen shelf, instrument staging, sink position and requested room ventilation together. Any ventilation option needs a defined connection and project review.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-CS planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Necropsy stations
Place the sink on the right of the veterinary necropsy workstation to match the room layout. Review the approach to the sink, instrument drawer and adjoining casework without assuming transfer-equipment compatibility.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Place the sink on the right of the veterinary necropsy workstation to match the room layout. Review the approach to the sink, instrument drawer and adjoining casework without assuming transfer-equipment compatibility.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Material | 304 stainless steel |
|---|---|
| Included utilities | Hydro aspirator, vacuum breaker, spray hose, dissection rinse valve, GFCI receptacle |
| Storage | Large instrument drawer and perforated specimen shelf |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Match the right-hand sink to the room approach. Separately itemize adjacent casework, instrument storage, lighting and any table pictured.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-RH planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Necropsy stations
Place the sink on the left of the veterinary necropsy workstation to match the room layout. Coordinate instrument staging and service access with the neighboring animal-science cabinets.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Place the sink on the left of the veterinary necropsy workstation to match the room layout. Coordinate instrument staging and service access with the neighboring animal-science cabinets.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Material | 304 stainless steel |
|---|---|
| Included utilities | Hydro aspirator, vacuum breaker, spray hose, dissection rinse valve, GFCI receptacle |
| Storage | Large instrument drawer and perforated specimen shelf |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Match the left-hand sink to the room approach. Separately itemize adjacent casework, instrument storage, lighting and any table pictured.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-LH planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Service sinks
Coordinate an integral sink, continuous rinse, water controls and spray hose in one animal-science service station. Select the eyewash arrangement, drain option and additional receptacle configuration for written review.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Coordinate an integral sink, continuous rinse, water controls and spray hose in one animal-science service station. Select the eyewash arrangement, drain option and additional receptacle configuration for written review.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Overall | 32″ W × 40″ D × 41″ H |
|---|---|
| Cabinet depth | 20″ (sink basin projects a further 20″) |
| Sink rim height | 23″ from the floor |
| Clearance under basin | 9½″ |
| Overall height | 70½″ to the top of the faucet spout |
| Construction | 304 stainless steel, 14 gauge (2 mm), heliarc welded, polished |
| Faucet | Hot/cold gooseneck mixing faucet, paddle / wrist-blade controls |
| Aspirator | Hydro aspirator with vacuum breaker and flexible hose; cold water |
| Spray hose | 8 ft flexible hose sprayer; cold water |
| Electrical | 120 V, 60 Hz, 1 phase, 15 A; GFCI duplex receptacle |
| Water supply | Hot and cold; 58–60 psi and 4 GPM at the hydro aspirator |
| Rear rough-in | 1½″ drain centered 16″ from the left, 7½″ above the floor; hot ½″ at 12″ and cold ½″ at 20″ from the left, both 15″ above the floor; 4″ × 4″ junction box centered 27″ from the left, 21″ above the floor ( rough-in sheet ) |
| Mounting | Floor or wall mount |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Use the listed eyewash, drain and receptacle choices for this model. Keep requested hoses, water-control changes and added storage separate from the base configuration.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-SS planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Flushing stations
Plan a dedicated flushing-fixture position for an animal necropsy suite. The vitreous china bowl, splash cover and service cabinet form a utility station; permitted waste and tissue-disposal routes require facility approval.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Plan a dedicated flushing-fixture position for an animal necropsy suite. The vitreous china bowl, splash cover and service cabinet form a utility station; permitted waste and tissue-disposal routes require facility approval.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| Cabinet | 32″ W × 20″ D × 40″ H to the top deck |
|---|---|
| Overall depth | 46″ including the flushing bowl |
| Overall height | 70½″ to the top of the faucet spout |
| Bowl rim height | 16½″ from the floor |
| Rear rough-in | 1½″ drain centered 16″ from the left, 7″ above the floor; hot ½″ at 12″ and cold ½″ at 20″ from the left, both 15″ above the floor; 4″ × 4″ junction box centered 27″ from the left, 21″ above the floor ( rough-in sheet ) |
| Construction | 304 stainless steel, heliarc welded, polished finish |
| Flushing fixture | Wall-hung vitreous china bowl with push-button flush valve |
| Faucet | Hot/cold mixing, tall gooseneck spout, wrist-blade handles |
| Aspirator | Hydro aspirator, vacuum breaker, reverse flow; cold water |
| Spray hose | Spray nozzle, 8 ft flexible hose |
| Electrical | 120 V, 60 Hz, 1 phase, 15 A; GFCI duplex receptacle with waterproof cover |
| Water supply | Hot and cold; 58–60 psi and 4 GPM at the hydro aspirator |
| Flush valve pressure | 10–100 psi; low-consumption valves need 25 psi running pressure |
| Mounting | Floor or wall mount |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Review the flushing bowl, splash cover, supply, drain and permitted waste route. This is not a disposal approval or a replacement for facility waste procedures.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-FS planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Necropsy stations
Request the existing sink-equipped table platform for a dedicated animal-science necropsy arrangement. Select the documented left- or right-hand sink; specimen support, capacity and the proposed necropsy application require written review.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Request the existing sink-equipped table platform for a dedicated animal-science necropsy arrangement. Select the documented left- or right-hand sink; specimen support, capacity and the proposed necropsy application require written review.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
| LEFT HAND SINK | Sink basin and faucet installed on the left-hand side |
|---|---|
| RIGHT HAND SINK | Sink basin and faucet installed on the right-hand side |
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Confirm the documented left- or right-hand sink. Drawers, doors, finish changes, capacity and veterinary necropsy suitability need their own written scope.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-ST planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
USPE PET · Casework packages
Coordinate an animal necropsy station with integrated cabinet storage and water-control plumbing. Build an itemized room schedule so the station, cabinet sizes, finishes and installation responsibilities remain clear.
Reference views preserve the existing equipment imagery. Alternate arrangements, older labels, drawings or separately supplied tables may be shown; included equipment follows the selected written scope.
Coordinate an animal necropsy station with integrated cabinet storage and water-control plumbing. Build an itemized room schedule so the station, cabinet sizes, finishes and installation responsibilities remain clear.
Reference specifications describe the existing equipment platform. Final veterinary configuration and utility rough-in require the approved project drawing.
Overall dimensions, connection locations and the final included fixture schedule are confirmed by project drawing; no unverified dimensions are substituted.
The configuration selector retains the documented equipment choices. Each request remains quote-only; optional components are not included unless selected and itemized.
Add the exact station model, configuration and quantity to the same equipment quote as your cabinets. Include room zone, worktop cutout, handedness, working height, plumbing/service clearance and finish requests. Cabinet fit is not assumed from a shared width label.
Veterinary casework · Room and cabinet planner · Options and part numbers
Qualified personnel must verify dimensions, support, service access, utilities, backflow protection and electrical protection. Isolate utilities before maintenance. Do not commission damaged equipment or equipment with leaks, loose supports or electrical defects.
Follow component instructions and the facility's approved cleaning protocol. Confirm agent, dilution, contact time and material compatibility. No pathogen-inactivation or sterilization claim is made. Do not mix chemicals or clean through electrical components.
Veterinary application, specimen dimensions and load, component compatibility, drainage, electrical supply and any ventilation requirement must be confirmed in the written quote and approved project documents. This station is not represented as a biosafety cabinet, containment system or clinical fluid-administration device.
Download the USPE PET model planning and care manual from the document section. This original reference is not a released operating procedure, fabrication drawing, disinfection validation or installation approval. Obtain the current supplied-component operating instructions before commissioning.
Original equipment images are retained as platform references, including alternative configurations, drawings and separately supplied equipment. Image labels may differ from the catalog code. Confirm the supplied model, handedness and included components in the written quote.
Compare necropsy stations, service sinks, flushing stations and water controls · Animal-science laboratory refrigeration · Review the equipment and casework quote
Prepare an itemized station and cabinet schedule. Coordinate the water control, top, sink, storage, service clearances and requested glass or hardware by cabinet model.
Coordinate animal-science casework · Specify material, glass and hardware
Download the USPE-PET-NC-CW planning and care guide. Includes every listed model code, utilities, care boundaries and the casework material, glass and door-style request form.
This is a planning reference, not a released installation or operating manual. Request the current project drawing and component instructions before commissioning.
Examination and treatment models are listed separately below. They are not automatically substitutes for a veterinary necropsy station.
