USPE Wall Mount Veterinary Exam Table

BUILT IN TENNESSEE. ANSWERED IN TENNESSEE. | FACTORY-DIRECT FROM JOHNSON CITY, TN | CUSTOM SIZES AVAILABLE — CALL 1-888-792-9315

The USPE 1036-274 is a wall-mounted folding examination table in Type 304 stainless steel, built for veterinary clinics, animal hospitals, necropsy suites, animal science programs, and shelter medicine facilities. The table folds flat against the wall when not in use — zero floor footprint in the stored position — and deploys in seconds with quick-disconnect pull pins on each side. A marine edge contains fluids on the work surface, and a folding support leg with adjustable leveling foot carries the load at the working end.

Every unit is fabricated by U.S. Pathology Equipment, the pathology and examination division of American Mortuary Equipment, and ships factory-direct. No dealer margin, no import lead times. The same 304 stainless fabrication that goes into our dissection tables, grossing stations, and autopsy stations goes into this table.

Standard design features

• Type 304 stainless steel construction — top, frame, and support leg
• Folds up against the wall for space saving; stored position clears the floor entirely
• Locking mechanism secures the table in both operating and stored positions
• Quick-disconnect pull pins for one-person deployment and stowing
• Marine edge contains fluids and runoff on the work surface
• Folding support leg with adjustable leveling foot for uneven floors
• Directional #4 brushed finish — cleanable, corrosion-resistant, non-porous
• Custom table sizes available on a per-project basis

Specifications

Built for veterinary, necropsy, and animal science work

Veterinary clinics and animal hospitals

Exam rooms are the most contested square footage in a clinic. A wall-mount folding table turns one wall into a full examination surface on demand — small and mid-size animal exams, treatments, grooming prep — then disappears when the room needs to flex. Pair it with a stainless lab work table and a foot-pedal scrub sink for a complete hands-free treatment zone.

Necropsy and animal pathology labs

The 304 stainless top, marine edge, and brushed finish meet the same cleanability standard as our human-side covered dissection tables and pedestal autopsy tables. For gross examination workflows, stage specimens with our stainless dissecting pans and wax dissecting trays, and weigh with the CHATILLON hanging autopsy scale.

Universities, ag programs, and government procurement

Animal science departments, veterinary teaching hospitals, USDA and state ag facilities, and county shelter systems purchase from us on standard institutional terms: formal quotes on letterhead, W-9 on file, purchase orders accepted, and one U.S. manufacturer answering the phone for the life of the equipment. Section 179 treatment applies for private-practice buyers; equipment financing is available with a simple application. Need a spec sheet for a bid package? Request a catalog or call 1-888-792-9315.

Custom exam tables

Size can be specified on a per-project basis — custom lengths, widths, working heights, and downward-storing configurations are available. We fabricate to your wall, your room, and your caseload. Submit dimensions and we quote to spec, the same way we handle custom stainless casework.

Mounting

Verify the support structure prior to installation. Wall backing should accommodate a maximum load of 250 lbs; use mounting anchors appropriate for the structure. Mounting drawings are supplied with each unit, and our Tennessee-based team walks your installer through anything unusual — tech service request or one phone call.

Care of stainless steel

Surfaces carry a directional #4 brushed finish. Clean with a hard-surface stainless disinfectant/cleaner. Do not use cleaners containing chlorine, steel wool, or carbon-steel brushes — chlorine attacks the passive layer and embedded carbon particles will rust. Wipe in the direction of the grain and towel dry to prevent water spotting.

Why buy factory-direct from USPE

• U.S. manufacturer since 2009 — family-owned, based in Johnson City, Tennessee
• One purchase order, one warranty contact across the full autopsy and pathology equipment line
• Quote-ready for government, university, and institutional procurement
• Custom fabrication in-house — not a reseller, not an importer

Frequently asked questions

What animals is the USPE 1036-274 sized for?

The standard 45" × 18.5" top handles small and mid-size companion animals and specimen work. For large-breed or livestock necropsy, we fabricate custom lengths and widths — call for a per-project quote.

Can one person deploy and stow the table?

Yes. Remove the quick-disconnect pull pins on each side, lower the table, and reinsert the pins to lock the operating position. Reverse to stow. No tools required.

What wall structure does it require?

The support structure should be rated for a 250 lb maximum load. Mounting drawings ship with each unit; use anchors appropriate for your wall construction.

Is this table suitable for necropsy and pathology use?

Yes. Type 304 stainless with a marine fluid-containment edge is the standard material specification for necropsy, dissection, and pathology surfaces.

Do you sell to government agencies and universities?

Yes — we work with government, university, shelter, and institutional buyers daily. Formal quotes, purchase orders, and bid-package documentation are standard. Call 1-888-792-9315.

Where is it made?

Fabricated in the U.S.A. by U.S. Pathology Equipment, a division of American Mortuary Equipment, Johnson City, Tennessee.