Mortuary Equipment Planning Guides


Mortuary Cooler Troubleshooting: Compressor, Temperature, and Ice Problems Solved

Field troubleshooting for packaged mortuary cooler refrigeration — compressor won't run, room too warm, ice in the drain pan, and...
1 min read
compressor

Why Your Mortuary Cooler Warranty Depends on Proper Installation

The installation conditions that keep — or void — your refrigeration warranty: voltage tolerance, factory wiring, drainage, placement, and licensed...
1 min read
installation

Mortuary Cooler Electrical Requirements: Why 115V Plug-and-Play Beats Hard-Wiring

Dedicated circuits, NEMA 5-20R plugs, and the electrical rules that keep your mortuary cooler warranty intact — no extension cords,...
1 min read
115V

P1 vs P2 vs P3 Cabinets: Heatcraft PRO³ Packaged Refrigeration Sizes Explained

The three Heatcraft PRO³ cabinet classes — P1, P2, P3 — and how condensate handling, panel openings, and capacity differ...
1 min read
cooler sizing

High Humidity and Mortuary Coolers: Managing Condensate in Southern Climates

Why Gulf-region and southern facilities need a condensate drainage plan for mortuary coolers — overflow risk, condensate pumps, and humidity...
2 min read
condensate

A2L Refrigerants Explained: What 2026 Refrigerant Rules Mean for Funeral Homes and Morgues

New Freon regulations pushed mortuary cooler refrigeration to low-GWP A2L refrigerants in 2026. What changed, what's safe, and what buyers...
1 min read
2026 refrigerant regulations

Heatcraft PRO³ Startup Checklist: 9 Steps Before You Power On Your Mortuary Cooler

A nine-step startup checklist for 2026 Heatcraft PRO³ packaged refrigeration on mortuary coolers — drainage, P-trap seal, electrical, and controller...
2 min read
Heatcraft PRO3

Do Mortuary Coolers Need a Drain Line? Condensate Drainage Explained

When a mortuary cooler needs an external condensate drain, what the P1/P2/P3 cabinet differences mean, and who is responsible for...
2 min read
condensate drainage

Self Contained Refrigeration Units for Mortuary Coolers: The Complete 2026 Guide

What a self contained refrigeration unit is, how the Heatcraft PRO³ packaged system works on upright mortuary coolers, and what...
2 min read
Heatcraft PRO3

The Complete Guide to Mortuary Equipment Monitoring with HALO

A comprehensive guide to mortuary equipment monitoring with HALO Smart Monitoring. Learn why real-time monitoring matters, how HALO works for...
4 min read
Equipment Monitoring

Morgue & Mortuary Compliance Checklist

Mortuary and morgue compliance spans several separate regulatory areas. This checklist pulls them into one place, linking to the full...
2 min read
2026

Morgue Equipment Lifecycle, Modernization & Replacement Guide

Every mortuary cooler eventually reaches the point where repair competes with replacement. Here's how to recognize that point and plan...
2 min read
2026

Morgue & Mortuary Capacity Planning: The Complete Guide

Capacity planning comes down to matching real caseload data to refrigeration and racking, with room for growth built in from...
2 min read
2026

Custom Mortuary & Morgue Equipment Fabrication

Not every facility fits a standard footprint. Here's what custom mortuary and morgue equipment fabrication actually covers.
3 min read
2026

Cadaver & Autopsy Wash Stations

Cadaver and autopsy wash stations serve general sanitation and intake, a different function than ceremonial religious wash tables. Here's what...
1 min read
2026