Support

Mortuary Cooler Maintenance Center

The AMC Mortuary Cooler Maintenance Center — current seasonal bulletin plus Spring, Summer, Fall & Winter 2026 downloads, all-season care core & deep-dive guides.

PROACTIVE CARE. TOTAL CONFIDENCE.

Upright factory assembly: box only

Where offered and selected on the exact upright cooler or freezer model, factory assembly covers the box only, with casters installed when selected and applicable. Interior shelving installation and setting or installing the compressor/refrigeration unit are not included. A factory-assembled box still requires the separate interior installation, refrigeration placement, connection and startup work described in the equipment instructions.

Unassembled-only models remain unassembled only, and shell-only orders do not include refrigeration. Cabinet dimensions, usable openings, tier spacing, rack/tray ratings and the complete installed height must match the exact model and current factory drawing. Caster wheel diameter is not the installed caster-height allowance. Use the exact refrigeration package instructions and nameplate for clearances, electrical supply, drainage and commissioning; generic cooler values are not freezer specifications.

Mortuary Cooler Maintenance Center

The seasonal maintenance anchor for every AMC cooler and freezer — updated each season with the current Heatcraft & Turbo Air readiness bulletin. A well-maintained system protects your facility, your reputation, and the families you serve.

☀ Current Season — Summer 2026 Bulletin

Seasonal Bulletin Library — Download Any Season

🌱 SPRING 2026

Heatcraft & Turbo Air seasonal checklist — refrigerant & system checks, defrost/drain & heat tape, door hardware, airflow, humidity, outdoor unit readiness, controls & OEM parts.

⬇ DOWNLOAD

☀ SUMMER 2026 — CURRENT

Heat & humidity season — refrigerant checks, gaskets, caulking, condenser airflow, drain pan & P-trap management, parts sourcing.

⬇ DOWNLOAD

🍂 FALL 2026

Pre-winter readiness — leaf/debris clearing, condenser cleaning, heat-tape verification, gasket & closer service before cold season.

⬇ DOWNLOAD

❄ WINTER 2026

Cold-weather protection — drain freeze prevention, heated trace wire, P-trap liquid seal, outdoor condensing unit care.

⬇ DOWNLOAD

❄ WINTER 2025 — ARCHIVE

Last season's cold-weather bulletin — drain freeze protection, trace wire, P-trap liquid seal & condensing unit winter care. Kept for your service records.

⬇ DOWNLOAD

This page is updated at the start of each season; the newest bulletin always appears above as the current edition, and prior seasons remain archived here for your records.

Equipment Maintenance Sheets — Per-Product Guides

🧊 UPRIGHT & MULTI-VAULT COOLERS

Quarterly checks + annual compressor inspection — seals (dollar-bill test), shelving & rails, roller racks, drain, temperature, electrical & alarms.

OPEN GUIDE ›

🛠 RACKS & HANDLING SYSTEMS

Monthly inspections — casters, bump stops, rollers, welds, finish & leveling feet, with the 2026 Rack Inspection Guide download.

OPEN GUIDE ›

🩺 HYDRAULIC EMBALMING TABLES

Quarterly checklist — cylinders, pedals, brakes, drainage & structure, with the 2026 Maintenance Sheet download.

OPEN GUIDE ›

🚑 MORTUARY COTS & STRETCHERS

Quarterly checklist — frame, straps & buckles, mattress, casters, brakes & lift, with the 2026 Cot Maintenance Sheet download.

OPEN GUIDE ›

🧷 FOLDING DRESSING TABLES

Quarterly checklist — Formica® top, folding mechanism, casters, locks & frame, with the 2026 Dressing Table Sheet download.

OPEN GUIDE ›

Model-Specific Maintenance Guides & Service Logs — Free PDF Downloads

Every AMC cooler and freezer now has its own two-page maintenance guide and service log. Page one is a daily, weekly, monthly, quarterly and annual mortuary cooler maintenance checklist written for that model's refrigeration system, with its warranty conditions and a plain-language summary of its lower-GWP A2L refrigerant and current DOE and EPA compliance. Page two is a printable quarterly maintenance log, a service and repair record and a notes section. Dated, signed quarterly logs are a condition of every AMC warranty claim, so print page two and keep it with the unit.

WALK-IN MORTUARY COOLERS & FREEZERS
All sizes 6×8 – 24×24 Walk-In Mortuary Cooler or Freezer ⬇ Guide & log (PDF)
UPRIGHT & ROLL-IN MORTUARY COOLERS
Model 2B 2-Body Standard Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 2BX 2-Body Bariatric Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 3B 3-Body Standard Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 3BX 3-Body Bariatric Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 3BX-SL 3-Body Side-Load Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 4BX 4-Body Extra-Wide Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 2000-4B2D 4-Body Dual-Door Compact Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 6BMC-2D 6-Body Dual-Door Mortuary Cooler ⬇ Guide & log (PDF)
Model AMC-10B-2D 10-Body Dual-Door Upright Mortuary Cooler ⬇ Guide & log (PDF)
Model 2BR 2-Body Standard Roll-In Mortuary Cooler ⬇ Guide & log (PDF)
Model 2BXR 2-Body Bariatric Roll-In Mortuary Cooler ⬇ Guide & log (PDF)
Model TR3 3-Body Triple-Wide Roll-In Mortuary Cooler ⬇ Guide & log (PDF)
HIGH-DENSITY MULTI-DOOR COOLERS
Model 12B-3D 12-Body Triple-Door Mortuary Cooler ⬇ Guide & log (PDF)
MORTUARY FREEZERS
Model AMC-3BX-F 3-Body Oversized Mortuary Freezer ⬇ Guide & log (PDF)
VAULT-STYLE MORGUE COOLERS
Model 1070-2MB2 2-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-2MBS-1 2-Body Bariatric Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-2BVU-1 2-Body Vertical Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-3MBS 3-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-3BVU-1 3-Body Vertical Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-4MBE-1 4-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-3MB6 6-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-2MB8 8-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-09MB-1 9-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-12MB-1 12-Body Vault Morgue Cooler ⬇ Guide & log (PDF)
Model 1070-15MB-1 15-Body Vault Morgue Cooler ⬇ Guide & log (PDF)

Looking for a model not listed, or an older AMC cabinet? Call 1-888-792-9315 or email service@mymortuarycooler.com with your serial number and we will send the matching sheet. Parts and manuals are on the tech support hub.

The All-Season Maintenance Core

1. Refrigerant & system checks — have a qualified, EPA §608-certified technician verify charge, operating pressures, superheat and subcooling against manufacturer documentation; low charge, airflow restriction, or improper settings reduce efficiency and stress components. 2. Doors — inspect gaskets for cracks, tears, and compression loss; clean with mild soap and water; check hinges, latches, closers, anchors, and full perimeter sealing; replace worn hardware promptly — warm air infiltration increases moisture load and forces the system to work harder. 3. Caulking & seams — reseal failing joints around doors, wall penetrations, and exterior seams. 4. Condenser & airflow — clean coils and fan blades, clear debris, maintain manufacturer clearances, keep units from excessive heat sources; restricted condenser airflow is one of the most common causes of reduced performance. 5. Drainage — clean the drain pan, confirm lines flow freely and are adequately sloped, use the 0.75″ NPT external drain connection for overflow conditions, protect freezing-exposed lines with heated trace wire, and maintain outdoor P-traps with a liquid seal. 6. Moisture watch — humidity, door traffic, failed seals, and blocked drains build water faster than internal evaporation can remove it; investigate stagnant water, odor, or early ice immediately. 7. Racks, cots, tables & handling equipment — inspect per the equipment maintenance sheets above on their monthly and quarterly schedules. 8. Controls & documentation — verify setpoints and temperature stability, review alarms, use OEM parts (drain-pan components are available through MortuaryCoolerParts), and record every service action — documentation supports troubleshooting, warranty review, and long-term equipment care.

REMOVE FROM SERVICE — mandatory stop-use safety mark

⛔ REMOVE FROM SERVICE — MANDATORY PROTOCOL

Any cooler, freezer, rack, rail, lift, cot, or table that fails an inspection or shows damage affecting safe operation must be immediately removed from service, tagged “DO NOT USE — REMOVED FROM SERVICE,” logged, and kept out of service until repaired and re-inspected. The purchasing facility is solely responsible for inspection, removal from service, and operator safety; continued use of damaged or failed equipment constitutes misuse at the facility's own risk, voids applicable warranty coverage under WR-1.0, and falls under the assumption-of-risk terms of our Product Liability, Assumption of Risk & Release and the stop-use conditions in TP-1.0.

✍ MAINTENANCE LOGS & WARRANTY SCOPE — CONDITIONS OF WARRANTY

All warranties are parts only — no labor — unless otherwise specified in writing by American Mortuary Coolers. Any labor services are provided exclusively at AMC's discretion.

All maintenance required by the applicable product documents — the seasonal bulletins on this page, each product's maintenance sheet, and the manufacturer's manuals — must be performed on schedule for each product. Every check must be recorded in a maintenance log entry that is dated and signed by the authorized person who conducted the check, identifying the equipment (model/serial), the items inspected, and the findings and corrective actions taken. Detailed, fully dated and signed maintenance logs must be produced with any warranty claim. Failure to perform the required maintenance, or failure to provide detailed and fully dated maintenance logs, voids the warranty claim under Warranty Policy WR-1.0.

Deep-Dive Guides

Full maintenance schedule & checklist • Upright & multi-vault cooler maintenance • Rack & cadaver handling system maintenance • Hydraulic embalming table maintenance • Mortuary cot maintenance • Folding dressing table maintenance • Mortuary Cooler Care 2026 • Upright Pro Tips 2026 • Seals & gaskets lifespan guide • Official manuals & startup guides • A2L safety symbols (SY-1.0) • Troubleshooting FAQ • Energy & Environmental Center (EN-1.0).

B2B professional use only. AMC serves professional, commercial, institutional, government, and authorized facility buyers. Payment security: verify ACH/wire instructions by calling AMC directly at 1-888-792-9315 before sending funds — we never email sensitive payment or banking changes. Compliance & safety: buyers remain responsible for OSHA, state OSHA, workplace safety, installation, maintenance, and all applicable regulatory and facility requirements. This page provides general maintenance guidance only; the latest manufacturer manuals, product-specific instructions, and qualified service requirements always control.

Need service, parts, or have questions? Contact our team today.

Model and serial number ready — we'll walk the seasonal checklist with you and source any OEM parts.

Call 1-888-792-9315 or email cool@mymortuarycooler.com

American Mortuary Coolers • 140 Kwickway Lane, Johnson City, TN 37615 • Trusted Mortuary Equipment Supplier Since 2009 • Built for Life's Critical Work.

Shop Funeral Home Mortuary Coolers

Compare the actual equipment below, choose the required options and add an eligible configuration to your cart. Quote-only and configured systems retain their dedicated product path.

  1. Choose the equipment
  2. Select options and quantity
  3. Review your cart or itemized quote
6x8 Walk-In Mortuary Refrigerator

6x8 Walk-In Mortuary Refrigerator

SKU AMC-0608-6
$8,825.00
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Configurable buildPO accepted

Configure & price Add to quote
8x8 Walk-In Mortuary Refrigerator

8x8 Walk-In Mortuary Refrigerator

SKU AMC-0808
$10,238.00
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Configurable buildPO accepted

Configure & price Add to quote
8x12 Walk-In Mortuary Refrigerator

8x12 Walk-In Mortuary Refrigerator

SKU AMC-0812-8
$11,660.94
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Configurable buildPO accepted

Configure & price Add to quote
10x10 Walk-In Mortuary Refrigerator

10x10 Walk-In Mortuary Refrigerator

SKU AMC-1010
$11,695.50
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Configurable buildPO accepted

Configure & price Add to quote

Compare cold storage around the space and loading plan

Start with the equipment you need to move into storage, the usable room dimensions and the available access route. An upright refrigerator, a roll-in cooler and a walk-in system are different configurations; compare their actual listings before choosing.

  • Capacity and access: confirm the listed storage arrangement and loading direction.
  • Fit: compare exterior and usable dimensions, door clearance and the delivery route.
  • Configuration: identify refrigeration, floor, rack and tray selections separately.
  • Project scope: confirm utilities, delivery requirements and the applicable written warranty.

Plan a phased mortuary-cooler replacement

Start with an inventory of the equipment in service, its dimensions and the workflow that must stay available during replacement. Identify the units needed first, the interfaces that must remain compatible and the later phases you want to budget. Separate a planning quantity from an approved purchase.

  • For each phase, identify the model or specification, quantity, delivery location and intended purchasing period.
  • Record dependencies such as door clearances, loading direction, transfer height, tray size, floor conditions and utilities where relevant.
  • Request separate line items for equipment and selected accessories so the order can be reviewed by location and fiscal period.
  • Review quote validity, current availability and delivery requirements before approving each phase; a planning quote is not a promise of a fixed future price.

Request a phased equipment or multi-location quote with the first purchase and later requirements clearly identified. Use the same approach for an independent facility, a public department or a corporate equipment-replacement program.

For several products or locations, request an itemized Funeral Home Mortuary Coolers quote with selected models, quantities and delivery ZIP codes. Use general customer support for selection questions, and review the written warranty terms before ordering.

Plan year-end equipment purchases around the actual equipment and timing

Review current catalog prices, choose the required configuration and separate the first purchase from later replacement phases. Build an itemized priced quote, or request a formal equipment quote with quantities, locations and your purchasing period. Request written price validity rather than assuming an unannounced future price increase or an additional sale discount.

Can Section 179 affect an equipment purchase?

For tax years beginning in 2026, IRS Revenue Procedure 2025-32 sets a maximum Section 179 expense deduction of $2,560,000, reduced when qualifying property placed in service exceeds $4,090,000. These are statutory limits, not a promise that this purchase or every buyer qualifies.

The IRS explains that property is generally placed in service when ready and available for its specific use. Eligibility, business use, taxable income and other requirements matter; ordering, financing or paying before year-end does not by itself establish a deduction. Confirm treatment and timing with your tax professional before relying on a tax benefit.

Use our 2026 Section 179 planning guide and illustrative calculator alongside the selected model's requirements. Confirm freight, installation responsibilities and availability separately; a year-end planning request is not a delivery guarantee.

Compare your options. Choose your next step.

One source for funeral supplies and mortuary equipment, with nationwide shipping. Review the Funeral Home Mortuary Coolers selection, compare product specifications and current pricing, then order the configuration you need or request an itemized quote.

  1. Choose the modelCompare the details against the work you need to do.
  2. Set your quantitiesReview the selected options and equipment subtotal.
  3. Buy or request a quoteReview freight, tax and available payment terms separately.

Need several items or delivery to more than one location? Include the models, quantities and delivery ZIP codes in your request. For general questions, contact customer support.