American 3 Body Upright Mortuary Cooler – Standard Width
AMC 3B. Three-body upright format; compare the current native options and installation documentation.
From $8,357.01 USD
View options & priceAmerican Mortuary Coolers · AMC
Morgue Cooler
Choosing a morgue cooler starts with one practical question: how will a case enter, be stored and leave your facility? Use this planning guide to match body capacity, loading method, room dimensions and purchasing scope before selecting a model.
For a concrete starting point, the AMC 3B three-body upright model is listed from $8,357.01 USD. A different capacity or loading arrangement may be a better fit; this is not a universal room recommendation.
What to measure before buying a morgue cooler
A morgue cooler is refrigerated equipment for professional storage of human remains. “Mortuary cooler” is another common term for the same equipment category. The name alone does not tell you the number of positions, usable tray size, door clearance, refrigeration arrangement or loading method.
- Storage requirement: document normal occupancy, peak demand, maximum case dimensions and the number of separately supported positions needed.
- Room and access: measure the proposed footprint, ceiling clearance, door swing, service access and the full delivery route.
- Loading method: identify whether cases will enter on trays, a cot or a rack system. Include the equipment used on arrival and at release.
- Utilities: check the exact model's electrical and installation documentation. Do not assume one model's power, drainage or placement requirements apply to another.
- Receiving plan: identify the destination ZIP code, loading dock, forklift or other receiving arrangements, thresholds and final placement responsibilities.
For a replacement project, include photographs of the existing opening and data plate as well as the room measurements. For a new facility, review the cooler, room layout and handling equipment together before finalizing the purchase.
Which morgue cooler format fits the job?
An upright cooler organizes storage positions vertically. A roll-in cooler is a different loading format, with cot fit to be confirmed for the model. A walk-in cooler needs a coordinated rack layout and working-aisle plan. Do not equate nominal room size with a guaranteed body capacity.
A model-specific morgue cooler price example
The AMC 3B is a three-body standard-width upright mortuary cooler. Its native product page contains the selectable configurations, current price and model documentation. Use that information to evaluate this specific unit rather than applying its features to every cooler.
The starting price shown here follows the native product record. Selected options, freight, taxes and installation-related scope can affect the order total. Request an itemized quote if the project includes racks, a lift, extra trays or other equipment.
For a broader shopping comparison, see the morgue coolers model and price landing. It compares upright, roll-in, walk-in and higher-capacity choices without changing this planning page into a duplicate catalog.
Write a complete morgue cooler purchasing scope
Separate the refrigeration equipment from the room work and handling equipment. Ask the quote to identify the selected cooler configuration, included storage supports, optional accessories, freight arrangement, receiving responsibilities and installation scope. Verify which items are included instead of assuming that a pictured rack, tray or lift is part of every configuration.
Record the required operating conditions and monitoring procedure with the facility's responsible professional. Long-term freezing is a different requirement from refrigerated storage; compare the mortuary freezer collection if freezing is needed. Do not infer a temperature range or freezer capability from a generic morgue cooler label.
Keep model documents, approved equipment selections and site measurements with the purchase record. That creates a more useful comparison than price alone and helps the receiving team understand what must be ready when equipment arrives.
Racks, trays and lifts for your cooler
A body-capacity label is only part of the storage plan. Coordinate each rack position, tray support and transfer method. Review end-loading racks, side-loading racks and cantilever racks for the actual project.
The 1030-LPL low-profile lift lists a 13 inch bare-deck minimum, with ball transfers above the deck. Low profile does not guarantee bottom-tier access. The H1000-M manual scissor lift starts at a 20.5 inch deck height. Measure the receiving surface before selecting either lift.
Compare the TITAN stainless body tray with the selected rack and handling method. HD plastic body boards are supported-storage barriers, not lifting, carrying or transfer supports.
Morgue cooler questions
What are morgue coolers called?
Common equipment names include mortuary coolers, cadaver refrigerators and refrigerated body-storage units. Upright, roll-in, walk-in and vault-style describe different arrangements. Use the exact model and loading format when comparing quotes.
What tools do morticians need?
The equipment list depends on the services performed. First-call work can require a cot, restraints and transfer accessories; body storage can require a cooler, racks, trays and a suitable lift. Preparation-room equipment and protective supplies should be selected for the facility's procedures and applicable requirements. Compare the prep-room equipment and removal-package guide for the relevant purchasing scope.
How long do people stay in a mortuary?
Ask the funeral director or responsible authority to confirm the release timetable, storage arrangements and requirements for the actual case. An equipment page cannot set that period, and a cooler's capacity or temperature setting is not a legal holding-time approval.
Where can I find funeral equipment for sale?
Shop the native mortuary equipment and funeral supply collections, or request one itemized quote for the selected equipment, options and freight. MyMortuaryCooler.com brings AMC refrigeration, AME TITAN equipment, USPE project equipment and Funeral Source One service supplies into one shopping path.
What is a morgue cooler?
A morgue cooler is refrigerated equipment for controlled storage of human remains in a professional facility. The term is commonly used interchangeably with mortuary cooler. Capacity, temperature capability and installation requirements must be checked for the specific model.
How many bodies should a morgue cooler hold?
Choose capacity from normal occupancy, peak demand, maximum case dimensions and the way cases enter and leave storage. Confirm the number of usable supported positions in the selected configuration rather than relying on room size alone.
Is a two-body cooler always an upright model?
No. The AMC 2B is an upright model, while the AMC 2BR is a roll-in model. Check the exact native product and handle; the storage count does not establish the loading format.
Can you help match a cooler to an existing room?
Provide room dimensions, door location, available power information, tray or cot dimensions and delivery access details. The equipment quote should identify the selected configuration and any fit questions still requiring confirmation.
What should a morgue cooler quote include?
Ask for the model, selected options, storage arrangement, included equipment, freight, receiving responsibilities and installation scope. Review the returns and cancellations policy before ordering; coolers are final-sale equipment under the posted policy.
Need help planning your morgue cooler?
Send your required capacity, room and opening measurements, loading method, utilities information and delivery ZIP code. Request a practical comparison based on the actual facility rather than an assumed fit or an unverified delivery date.
Continue with morgue cooler models, single-cooler planning, the full mortuary cooler collection or crematory lift options.
Prices shown are catalog starting prices checked October 28, 2026. The linked product page and selected configuration govern the current price; freight, taxes and optional scope are separate.
