Morgue Equipment Guide: What Each Room Needs, From Intake to Release

A practical, room-by-room list of the equipment a morgue needs, how the pieces fit together and what to measure before you request a quote.


5 min read

Four-body upright mortuary cooler

A morgue works as a chain: a decedent arrives, is stored, examined or prepared, and released. Every link in that chain needs equipment that fits the room, the caseload and the people doing the work. This guide walks through each area in order, so you can plan a new facility, replace worn equipment or find the gap that slows your staff down.

Key takeaways

  • A cot or morgue cart moves the decedent inside, and a covered cadaver carrier keeps transport discreet in hospital corridors.
  • Smaller funeral homes and clinics often start with a 2- to 4-body upright cooler.
  • Side-loading racks work in narrow rooms; roller racks pair with trays so one person can slide a decedent in or out.
  • Lifting injuries are among the most common hazards for morgue staff.
  • Hospitals and medical examiners need autopsy tables, often with downdraft ventilation, plus grossing stations and dissection sinks.

Start with caseload and floor plan

Before choosing any single item, write down three numbers: your average daily census, your peak census during a bad week, and the clear floor space and door widths along the path from the receiving door to storage. Those numbers decide almost everything else, from cooler capacity to whether a lift can turn in the room. Our cooler size guide and facility planning guide go deeper on both.

Receiving and transport

Intake starts at the vehicle. A cot or morgue cart moves the decedent inside, and a covered cadaver carrier keeps transport discreet in hospital corridors. Check the cart's deck height against your cooler racks and tables; matching heights cut down on manual lifting. Stock body bags and disaster pouches in more than one size, including bariatric.

Refrigerated storage

Storage is the largest purchase in most morgues. Smaller funeral homes and clinics often start with a 2- to 4-body upright cooler. Hospitals, coroners and high-volume operators usually move to a walk-in mortuary cooler with racks, which scales with the caseload and lets staff work inside. Long-term holds call for mortuary freezers. Every cooler we sell includes the refrigeration system, so there is no separate condensing unit to source. Watch the 3-Body Standard Upright Mortuary Cooler video on our YouTube channel.

Four-body upright mortuary cooler
A four-body upright cooler suits funeral homes and smaller hospital morgues.

Hold refrigerated remains at a steady temperature, typically 34 to 38°F, and confirm your state's rules. Our temperature guide and state regulations guide cover the details.

Racks, trays and boards

Inside a walk-in, mortuary racks multiply capacity. Side-loading racks work in narrow rooms; roller racks pair with trays so one person can slide a decedent in or out. Stainless steel body trays come in 23, 27 and 30 inch widths, with custom sizes available, and laminated body boards give a light, cleanable surface for shelving.

Four-tier side-loading mortuary rack
A four-tier side-loading rack increases walk-in capacity without widening the room.

Lifting and handling

Lifting injuries are among the most common hazards for morgue staff. A mortuary body lift moves a decedent from cot to rack or table without a team lift, and it is the item most often missing from older rooms. Plan the lift's footprint at the same time as the racks, since it needs clearance in front of each tier. Our lift and handling guide compares the options.

Examination and preparation

Hospitals and medical examiners need autopsy tables, often with downdraft ventilation, plus grossing stations and dissection sinks. Funeral homes need embalming tables and an embalming station with water control. Choose stainless steel with welded seams and a drain that matches your plumbing.

Adjustable height pedestal autopsy table
An adjustable-height pedestal autopsy table lets each pathologist set a safe working height.

Safety, PPE and cleaning

Keep PPE and prep supplies and exam gloves by the case stocked at the point of use, and plan ventilation, eyewash and floor drains with the room layout. Our OSHA checklist lists the items inspectors look for.

Viewing and release

Many facilities need a respectful place for identification. ID viewing sets and viewing room sets help, along with cot covers for release to the funeral home.

Planning checklist

  • Daily and peak census, plus growth over five years
  • Door widths and turning space from intake to storage
  • Storage type: upright, roll-in, walk-in or freezer
  • Racks, trays and boards sized to your cots and lifts
  • A lift for every storage area
  • Exam or prep tables, sinks and ventilation
  • PPE, gloves and cleaning stations at the point of use
  • Viewing and release space

Get a quote

Send your room dimensions, census and equipment list with our quote request form, email cool@mymortuarycooler.com or call 1-888-792-9315. Purchase orders, institutional RFQs and volume orders are welcome, and the procurement packet has the documents most purchasing offices ask for. 0% APR offers are available through Shop Pay with approved credit, and freight is shown at checkout.

Related guides