Do Mortuary Coolers Need a Drain Line? Condensate Drainage Explained
One of the most common pre-purchase questions on upright mortuary coolers: do I need a drain line? The answer: sometimes — it depends on your cabinet model, indoor humidity, run time, and site conditions. Watch the 3-Body Standard Upright Mortuary Cooler video on our YouTube channel.
Key takeaways
- In high indoor humidity or extended run-time applications, the re-evaporation pan can overflow.
- Add water to the condensate drain line at startup to establish the liquid seal in the P-trap.
- For those installations, the indoor PRO³ includes a 3/4″ NPT external drain connection that should be routed to a suitable remote drain via a field-supplied condensate pump or external drain line.
- If a drain line runs through freezing conditions, it must be adequately sloped and equipped with a heated trace wire.
Cabinet model matters
P1 cabinet models include a 5/8″ external condensate drain line and do not evaporate condensate internally — the drain must be connected properly. P2 and P3 cabinets include an internal re-evaporation pan beneath the compressor; in normal cold-storage conditions the pan evaporates coil condensate with no external drain required.
When high humidity changes the answer
In high indoor humidity or extended run-time applications, the re-evaporation pan can overflow. For those installations, the indoor PRO³ includes a 3/4″ NPT external drain connection that should be routed to a suitable remote drain via a field-supplied condensate pump or external drain line. Southern and Gulf-region facilities — Florida, Texas, Louisiana — should plan for this at install.
P-traps and freeze protection
Add water to the condensate drain line at startup to establish the liquid seal in the P-trap. If a drain line runs through freezing conditions, it must be adequately sloped and equipped with a heated trace wire. Outdoor units always require a field-piped drain line.
Whose responsibility is it?
Drainage, condensate routing, P-trap preparation, code compliance, and site readiness are the responsibility of the purchaser, installer, facility owner, plumber, or HVAC/R contractor unless included in writing by AMC. Improper drainage is not a product defect and is not a warranty claim. Full details, official manuals, and the complete drainage notice live on our Packaged Refrigeration Manuals & Startup Guide.
Not sure if your prep room needs a condensate drain?
Tell us your climate and run profile before you order — we'll spec the drainage plan with your quote.
Call 1-888-792-9315 or email cool@mymortuarycooler.com
Resources & Related Videos
Product videos
- 3-Body Standard Upright Mortuary Cooler | American Mortuary Coolers (YouTube, AMERICAN MORTUARY EQUIPMENT™) — view the product
- 2 Body Mortuary Cooler AMC Model #2BR (YouTube, AMERICAN MORTUARY EQUIPMENT™) — view the product
- 4 Body Oversized Mortuary Cooler with Interior Rolling Rack Model# 4BX (YouTube, AMERICAN MORTUARY EQUIPMENT™) — view the product
Related products
- 2 Body Standard Roll-In Mortuary Cooler – Model 2BR — $7,414.11
- 3 Body Upright Mortuary Cooler – Model 3B — $8,315.01
- 4-Body Extra-Wide Mortuary Refrigerator (4BX) — $9,107.01
See all videos on the AMERICAN MORTUARY EQUIPMENT™ YouTube channel






