Resources

Best-Value Mortuary Coolers

Shop 2-, 3-, and 4-body mortuary coolers and walk-ins from $7,414.11. Live prices, HALO monitoring on 6x8 and 10x10 walk-ins, 15-year panel warranty, and $1,895 published freight up to 10x20.

Best-Value Mortuary Coolers

Mortuary coolers · walk-in morgue refrigeration

Starting at $7,414.11

Choose a 2-, 3-, or 4-body cabinet or a walk-in with live prices, published freight, and written panel and compressor warranties. We sell new factory-direct coolers — not used units.

Call 1-888-792-9315 · cool@mymortuarycooler.com · Johnson City, TN

2 Body Standard Roll-In Mortuary Cooler – Model 2BR
3-Body Mortuary Refrigerator upright mortuary cooler
6x8 Walk-In Mortuary Refrigerator walk-in mortuary cooler
10x10 Walk-In Mortuary Refrigerator walk-in mortuary cooler
  • Published Freight
  • Factory-Direct Warranty
  • Shop Pay Monthly
  • Section 179 Eligible

Published Lower 48 freight, written warranties, Shop Pay for qualifying purchases, and a 2026 Section 179 maximum of $2,560,000.00 (IRS Rev. Proc. 2025-32). This is general information, not tax advice — see Freight & Landed Cost and Section 179.

Good / Better / Best cooler lineup

Good / Better / Best Model Live starting price Published freight tier (when that profile applies)
Good · 2-body roll-in $7,414.11 Unassembled upright / triple roll-in: $1,695.00
Good · 2-body upright $8,097.21 $1,695.00 unassembled or $2,095.00 factory assembled
Better · 3-body $8,315.01 Factory-assembled 2–3 body: $2,095.00
Better · 4-body extra-wide $9,107.01 Confirm the applicable cooler freight profile on the quote
Best walk-in · 6′×8′ $8,825.00 $1,895.00 flat up to 10′×20′
Best walk-in · 8′×8′ $10,238.00 $1,895.00 flat up to 10′×20′
Best walk-in · 10′×10′ $11,695.50 $1,895.00 flat up to 10′×20′

Browse mortuary coolers, upright coolers, roll-in coolers, walk-in coolers, and 6-body configurations. Compare ownership costs on used vs. new mortuary coolers.

Frequently asked questions

What is the lowest-priced mortuary cooler on this page?

The 2 Body Standard Roll-In Mortuary Cooler – Model 2BR starts at $7,414.11. The 2-Body Upright Mortuary Cooler starts at $8,097.21 in the unassembled, no-casters, standard configuration.

What walk-in sizes are priced here?

Live starting prices are $8,825.00 for the 6′×8′, $10,238.00 for the 8′×8′, and $11,695.50 for the 10′×10′ walk-in refrigerator. Usable body count depends on rack configuration. For 6-body and larger layouts, see the 6-body mortuary cooler collection and request a configured quote.

What refrigerant, electrical, and warranty terms are published?

The 2-body upright uses self-contained 115V single-phase refrigeration with a NEMA 5-20R cord and plug, A2L lower-GWP refrigerant, and a 2,900 BTU/h rating at 95°F ambient / 35°F box. The 6x8 and 10x10 walk-ins are specified with 4-inch foamed-in-place urethane panels (R-25), HALO remote temperature monitoring, a 15-year limited panel warranty, a 5-year compressor parts warranty, and a 90-day labor warranty. Confirm the exact refrigeration package on the product page for the size you order.

What freight applies to coolers?

Published Lower 48 freight includes $1,695.00 flat for unassembled upright and triple roll-in coolers, $2,095.00 flat for factory-assembled 2- and 3-body uprights, $1,895.00 flat for walk-in coolers and freezers up to 10′×20′ (200 sq ft), and $2,995.00 base freight for dual-door / 10-body / 12-body coolers. Walk-ins larger than 10′×20′ are freight-quoted. Confirm the profile that applies to your SKU on the quote.

Can Section 179 apply to a cooler purchase?

Qualifying business equipment placed in service during the tax year may be eligible. The 2026 statutory Section 179 maximum is $2,560,000.00, subject to the $4,090,000.00 phase-out threshold and taxable-income limits (IRS Revenue Procedure 2025-32). This is an illustrative framework, not tax advice — consult your CPA.

Shop Mortuary Coolers for Funeral Homes

Compare the actual equipment below, choose the required options and add an eligible configuration to your cart. Quote-only and configured systems retain their dedicated product path.

  1. Choose the equipment
  2. Select options and quantity
  3. Review your cart or itemized quote
2 Body Standard Roll-In Mortuary Cooler – Model 2BR

2 Body Standard Roll-In Mortuary Cooler

SKU 2BR
From $7,414.11
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Built to orderPO accepted

Configure & price Add to quote
3-Body Extra-Wide Mortuary Refrigerator
MADE IN
THE USA

3-Body Extra-Wide Mortuary Refrigerator

SKU 3BX
From $8,770.41
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

PO accepted

Configure & price Add to quote
4-Body Extra-Wide Mortuary Cooler
MADE IN
THE USA

4-Body Extra-Wide Mortuary Cooler

SKU 4BX
From $9,107.01
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

Built to orderPO accepted

Configure & price Add to quote
3-Body Mortuary Refrigerator
MADE IN
THE USA

3-Body Mortuary Refrigerator

SKU 3B
From $8,315.01
Estimated from Check financing Equipment estimate. Approval required. Tax and delivery extra.

PO accepted

Configure & price Add to quote

Compare cold storage around the space and loading plan

Start with the equipment you need to move into storage, the usable room dimensions and the available access route. An upright refrigerator, a roll-in cooler and a walk-in system are different configurations; compare their actual listings before choosing.

  • Capacity and access: confirm the listed storage arrangement and loading direction.
  • Fit: compare exterior and usable dimensions, door clearance and the delivery route.
  • Configuration: identify refrigeration, floor, rack and tray selections separately.
  • Project scope: confirm utilities, delivery requirements and the applicable written warranty.

Plan a phased mortuary-cooler replacement

Start with an inventory of the equipment in service, its dimensions and the workflow that must stay available during replacement. Identify the units needed first, the interfaces that must remain compatible and the later phases you want to budget. Separate a planning quantity from an approved purchase.

  • For each phase, identify the model or specification, quantity, delivery location and intended purchasing period.
  • Record dependencies such as door clearances, loading direction, transfer height, tray size, floor conditions and utilities where relevant.
  • Request separate line items for equipment and selected accessories so the order can be reviewed by location and fiscal period.
  • Review quote validity, current availability and delivery requirements before approving each phase; a planning quote is not a promise of a fixed future price.

Request a phased equipment or multi-location quote with the first purchase and later requirements clearly identified. Use the same approach for an independent facility, a public department or a corporate equipment-replacement program.

For several products or locations, request an itemized Mortuary Coolers for Funeral Homes quote with selected models, quantities and delivery ZIP codes. Use general customer support for selection questions, and review the written warranty terms before ordering.

Plan year-end equipment purchases around the actual equipment and timing

Review current catalog prices, choose the required configuration and separate the first purchase from later replacement phases. Build an itemized priced quote, or request a formal equipment quote with quantities, locations and your purchasing period. Request written price validity rather than assuming an unannounced future price increase or an additional sale discount.

Can Section 179 affect an equipment purchase?

For tax years beginning in 2026, IRS Revenue Procedure 2025-32 sets a maximum Section 179 expense deduction of $2,560,000, reduced when qualifying property placed in service exceeds $4,090,000. These are statutory limits, not a promise that this purchase or every buyer qualifies.

The IRS explains that property is generally placed in service when ready and available for its specific use. Eligibility, business use, taxable income and other requirements matter; ordering, financing or paying before year-end does not by itself establish a deduction. Confirm treatment and timing with your tax professional before relying on a tax benefit.

Use our 2026 Section 179 planning guide and illustrative calculator alongside the selected model's requirements. Confirm freight, installation responsibilities and availability separately; a year-end planning request is not a delivery guarantee.

Compare your options. Choose your next step.

One source for funeral supplies and mortuary equipment, with nationwide shipping. Review the Mortuary Coolers for Funeral Homes selection, compare product specifications and current pricing, then order the configuration you need or request an itemized quote.

  1. Choose the modelCompare the details against the work you need to do.
  2. Set your quantitiesReview the selected options and equipment subtotal.
  3. Buy or request a quoteReview freight, tax and available payment terms separately.

Need several items or delivery to more than one location? Include the models, quantities and delivery ZIP codes in your request. For general questions, contact customer support.