Estimated from1036-9WCU Embalming Water Control Unit with Hydro Aspirator$2302.99Apply with TimePayment (opens in a new tab)Apply for financing
Equipment estimate only. Subject to lender approval and terms. Tax and delivery extra.
The AME 1036-9WCU Water Control Unit combines the tall filler spout, table-rinse outlet and hydro-aspiration controls on a pre-plumbed stainless steel countertop plate. Select the filler-spout position before adding the complete unit to your cart. Replacement parts remain quote-only.
Form AME-OM-1036-9WCU Rev. B · Last updated October 29, 2026 · PDF, 16 pages
Cutout and mounting, plumbing rough-in, commissioning, operation, numbered parts diagram with AME part numbers, plumber detail pages for the mixing valves, aspirator and vacuum breaker, care, troubleshooting, state drain codes and service records. Scan the QR code on the cover to open the equipment reference page.
Tall swivel filler spout for an embalming-machine tank, with master mixing valves to adjust the supplied water temperature.
Table-rinse outlet with serrated hose connection and controlled flow.
Hydro-aspirator with a dedicated cold-water valve, vacuum breaker, clear-sight drain and air gap.
Preassembled, pre-plumbed construction on a heavy-gauge stainless steel base plate.
Left, right or no-preference filler-spout configuration. A no-preference order does not guarantee a left-hand unit and cannot be changed after ordering.
Specifications
Base plate
18″ W × 14″ D heavy-gauge stainless steel, radiused corners
Mounting holes
4, on 16″ × 12″ centers
Hot and cold supply
½″ NPT each
Drain
1½″ to a standard P-trap; 2″ on request
Outlets
OUT 1 table rinse; OUT 2 tall filler to the embalming machine
Aspiration
Hydro-aspirator with vacuum breaker, clear-sight drain and air gap; dedicated cold water valve; water wand
Configurations
1036-9WCU-1 left, 1036-9WCU-2 right, 1036-9WCU-3 no preference
Countertop
Drop-in cutout; counters as shallow as 18″ deep
Configuration and installation
Handedness is identified by the position of the tall filler spout, not by the hot/cold inlet side. This is a countertop-mounted assembly, not a freestanding sink or wall-mounted service station. Confirm the countertop cutout, drain arrangement, service clearance and utility connections against the model-specific manual and approved installation drawing.
The complete unit includes the installed aspirator, faucet valves, tall filler faucet and braided supply lines, plus a water wand and two 10-foot lengths of clear tubing. Counter fasteners and sealant are not included. Qualified personnel must make and check the connections; the facility's plumbing professional and local authority must confirm requirements for the actual installation.
Replacement parts for the Water Control Unit
Every serviceable part on the 1036-9WCU plate has an AME part number. Match the installed part to the numbered diagram and model-specific manual, then request replacement parts by model and AME part number.
Item
AME part no.
Description
1
AME-WCU-FILL
Tall fill faucet with 18 in. swing nozzle
2, 3
AME-WCU-MIX
Single-lever mixing valve (2 per unit); cartridge, handle, hoses
4
AME-WCU-RINSE
Spray rinse gooseneck with vacuum breaker, tip and 10 ft hose
5
AME-WCU-VB
Atmospheric vacuum breaker, 1/2 in. NPT; repair kit
6
AME-WCU-ASP
Reverse-flow hydro-aspirator; venturi, handle, service kit, wand head, extension
7
AME-WCU-CWV
Cold-water control valve, cross handle
8
AME-WCU-DRAIN
Sight drain assembly with 1-1/2 in. tailpiece
9
AME-WCU-HOSE-ASP10
Clear aspirator hose, 10 ft; 5 ft sight-drain hose
10
AME-WCU-HDW
Mounting hardware kit, 4 × 10-24 × 2 in.
11
AME-WCU-MIX-HOSE
Braided supply hoses, 16 in., pair
All AME replacement parts are quote only: request parts by model and AME part number, or call 1-888-792-9315 with the model, serial number and part number. Parts carry a one-year warranty with proper use (replacement parts only, no labor); parts sales are final.
Ordering 1036-9WCU Embalming Water Control Unit with Hydro Aspirator
Review the listed specifications, selected options and included items before ordering. Use the configuration selector for the current price and availability; do not assume that accessories pictured with a product are included unless the listing says so.
Source funeral supplies and mortuary equipment from one supplier, with nationwide shipping. For an equipment package or a multi-location order, request an itemized quote with the selected products, quantities and delivery ZIP codes. Confirm freight and delivery requirements for the equipment you choose.
Flexible payment options, with clear terms
Review the payment methods offered at checkout for your order. If a payment plan is available, its options and eligibility are shown by the provider. The equipment price and any financing cost are separate; compare the full payment terms before choosing a plan.
Enter payment details only in checkout or the payment provider's application. Use general customer support for product and order questions, not for sending full card numbers or sensitive financing information.
Choose the available options before adding the item to your cart. The selected configuration and model are carried through to the cart; check them against the dimensions and included components in the product details.
How can I confirm fit before ordering?
Use the dimensions and fit notes on this page. For a fit review, send the model, measurements and any equipment it needs to work with through our equipment quote form.
Where is shipping confirmed?
Shipping is calculated at checkout for the selected items, quantities and destination. Review the cart configuration and delivery address before placing the order.
1036-9WCU Embalming Water Control Unit with Hydro Aspirator
$2,302.99
1036-9WCU Embalming Water Control Unit with Hydro Aspirator
$2,302.99
Financing & purchase orders
Choose how to pay
Purchase through the product options above, or use one of these support paths for a financed or institutionally quoted order.
For businesses
Equipment financing
Financing is subject to application and credit approval.
Estimates are for qualified buyers with approved credit (WAC) and reflect the equipment price only. Shipping, freight, and applicable taxes are not included and will increase your total and payments. Final amounts are set at checkout or on your quote.
Government and institutional buyers: request a PO quote.
Complete the embalming room or care center around this cabinet
American Mortuary Equipment quotes the casework, the table, the sink or flushing station and the cooler together, so one drawing, one freight plan and one point of contact cover the room.
Values below are references recorded for this listing, not a new classification determination. Missing or unverified information must be confirmed for the exact configuration and purchasing system.
NAICS, recorded industry reference
Not recorded for this configuration. Request confirmation with your quote.Related supplier-industry reference, not confirmation of the vendor’s registered primary NAICS or the code assigned to your solicitation.
NAICS, registered primary
Not separately verified by this product record. Request the current vendor-registration information.
NAICS, solicitation
The buying agency assigns the solicitation code. Confirm it against the current notice or written RFQ; do not infer it from the product reference.
SIC
Not recorded for this configuration. Request confirmation with your quote.Legacy supplier-industry classification reference.
UNSPSC
Not recorded for this configuration. Request confirmation with your quote.Confirm the required edition and commodity or class level with the buyer.
PSC / FSC
Not recorded for this configuration. Request confirmation with your quote.Federal product or service classification reference; not contract eligibility.
NIGP
Not recorded for this configuration. Request confirmation with your quote.Recorded primary and secondary commodity references; confirm the agency’s list.
HS
Not recorded for this configuration. Request confirmation with your quote.Recorded heading reference; a customs broker confirms the goods, destination and final classification.
HTS
Not recorded for this configuration. Request confirmation with your quote.Recorded tariff reference, not a binding ruling. Review the full line for the selected configuration.
Model / order identifiers
AME-1036-9WCU-3 Order SKU reference, not automatically a manufacturer part numberConfirm the exact model, revision and option SKU on the written quote. A SKU or barcode is not certification evidence.
Shopify category
bi-19-5Medical FurnitureCatalog classification, not a government procurement code.
Which code your system uses
Federal: buyer-confirmed NAICS and PSC / FSCState, local and institutional: the buyer's required NIGP or UNSPSC referenceConstruction specifications: the project-required CSI sectionCustoms: goods- and destination-specific HS / HTS confirmation
Confirm the exact code, edition and classification level required by the purchasing system.
Brand / supplier record
American Mortuary EquipmentRequest current vendor documentation, any required authorization and the applicable purchasing route. A catalog brand does not establish contract-holder status.
Reference classifications for RFQ, bid, grant and purchase-order preparation. Codes, model numbers and any GSA Schedule SIN are different identifiers, not certifications; this panel does not assign a SIN or imply a contract award, set-aside status, government approval or universal regulatory compliance.
Comparing a GSA or government equipment quote? Request a written AMC comparison for 1036-9WCU Embalming Water Control Unit with Hydro Aspirator with the exact configuration, quantity and destination. AMC is not a GSA Schedule contract holder; your purchasing office must determine the permitted buying route.
Compare like-for-like equipment, included options, freight, any assembly or installation scope, warranty and written delivery terms. No blanket claim that AMC is cheaper than every GSA or government quote is made.