Wall Mount Embalming Service Station

American Mortuary Equipment American Mortuary Equipment
Skip to product information
1 of 6

Model: AME1036-2-2D · 2026 Model


Regular price $7,022.00
List price Sale price $7,022.00
Estimated from Apply with TimePayment (opens in a new tab) Apply for financing Equipment estimate only. Subject to lender approval and terms. Tax and delivery extra.
American Express DiscoverMastercard Visa Zelle® ACH
Shipping calculated at checkout.

  • Wall mount embalming service station — Model 1036-2
  • 304 stainless steel construction
  • Wall-mounted space-saving configuration
  • Integrated water and waste fittings
  • Designed for prep room workflow
Purchase terms & policies Shipping, returns, warranty and financing disclosures

Key details

  • Heavy-duty 304 stainless steel for corrosion resistance
  • Self-closing pre-rinse spray valve on a 10-ft flexible hose with its own wall control valve
  • 0.75 HP, 120 V continuous-feed waste disposer under the 12 × 16 × 8 in. sink, controlled by a 20 A toggle switch
  • Deluxe reverse-flow aspirator that helps prevent suction clogs
  • Pressure-balance tempering mixing valve with lever handle; cold flows first
Full description & specifications

Product information

Product details & specifications

Product details

The AME 1036-2 Wall Mount Embalming Service Station combines a stainless steel sink and water-control equipment in a wall-hung preparation-room station. Review the owner and service manual below with the approved equipment configuration before planning wall support and utility connections.

This equipment is quote-only. Request a written configuration and pricing review for your facility.

Cover of the AME 1036-2 Wall Mount Embalming Service Station Owner & Service Manual, American Mortuary Equipment PDF.

Form AME-OM-1036-2 Rev. A · Last updated October 29, 2026 · PDF, 16 pages

AME 1036-2 Wall Mount Embalming Service Station Owner & Service Manual

Specifications and dimensions, wall mounting, plumbing and electrical rough-in, commissioning, operation, numbered parts diagram with AME part numbers, plumber and electrician detail pages, care, troubleshooting, state drain codes and service records. Scan the QR code on the cover to return to this page.

Download Owner & Service Manual All manuals & forms

Product Overview

The Wall Mount Embalming Service Station (Model 1036-2) from American Mortuary Equipment is a space-saving, 304 stainless steel wall-hung sink and water-control station for funeral home preparation rooms, hospital pathology and morgue suites, autopsy rooms, medical examiner and forensic centers, and university anatomy labs. It comes equipped with a spray-hose system, hot and cold water control, a reverse-flow aspirator, and a waste disposer, with an optional emergency hand-held eyewash.

Features

  • Heavy-duty 304 stainless steel for corrosion resistance
  • Self-closing pre-rinse spray valve on a 10-ft flexible hose with its own wall control valve
  • 0.75 HP, 120 V continuous-feed waste disposer under the 12 × 16 × 8 in. sink, controlled by a 20 A toggle switch
  • Deluxe reverse-flow aspirator that helps prevent suction clogs
  • Pressure-balance tempering mixing valve with lever handle; cold flows first
  • Utility faucet with 12-in. swing spout on an elbow-handle wall valve
  • Built-in 20 A GFCI duplex receptacle on the back panel
  • Z-bar wall mounting, open stainless shelving, removable lower shelf and front and side access panels for plumbing
  • Optional emergency eyewash attachment

Technical Specifications

Specification Value
Height 71"
Length 30"
Depth 24.5"
Sink basin 12" × 16" × 8"
Material 304 stainless steel
Power 110V with GFCI-protected receptacle
Electrical circuits Two 120 V circuits: 20 A dedicated to the disposer switch; 20 A to the GFCI receptacle; 4 × 4 in. junction box in cabinet
Water supply Single point: hot 1/2 in. and cold 3/4 in. NPT inside the cabinet; 58 to 60 psi and 4 gpm minimum for the aspirator
Drain 1-1/2 in. standard (AME1036-2) or 2 in. (AME1036-2-2D) from the disposer P-trap
Mounting Two-piece Z-bar bracket at 68-1/2 in. AFF plus six 3/8 in. lower anchors into wall blocking
Models AME1036-2 standard drain · AME1036-2-2D 2 in. drain · Option SE emergency shower and eyewash

Installation, plumbing and electrical

The station hangs on a two-piece Z-bar bracket: the wall half fastens to continuous blocking at 68-1/2 in. above the finished floor and six 3/8 in. anchors secure the lower cabinet. Hot (1/2 in.) and cold (3/4 in.) supplies connect at a single point inside the cabinet; the disposer discharges through a P-trap to a 1-1/2 in. or 2 in. building drain. Two 120 V circuits terminate in a 4 × 4 in. junction box: a dedicated 20 A circuit for the disposer through the toggle switch and a 20 A circuit for the GFCI receptacle. The lowest shelf lifts out for plumbing access. Rough-in dimensions, mounting steps, commissioning checks and wiring are in the owner and service manual below.

Waste handling and disposal

Aspirator discharge and table rinse flow into the 12 × 16 × 8 in. sink and through the 0.75 HP continuous-feed disposer, so soft waste never reaches the trap. Run cold water before switching the disposer on and for 15 seconds after the sink clears; keep instruments, sutures, gauze, plastic, glass and large bone out of the disposer. The reverse-flow aspirator backflushes its clear 10-ft hose without disconnecting. Atmospheric vacuum breakers on the aspirator and spray valve protect the building supply; a 2 in. drain outlet is available for Pennsylvania, Maryland and New Jersey preparation rooms.

Frequently Asked Questions

Yes, it is manufactured by American Mortuary Equipment in the United States.

Is it wall-mounted or free-standing? Wall-mounted only, optimized for compact spaces.

Is the spray hose removable? It features a 10-ft flexible hose with an ergonomic spray nozzle.

Does it include an aspirator? Yes, a built-in deluxe reverse-flow aspirator.

Can it be customized to our plumbing setup? Yes, the open, accessible back supports custom plumbing configurations.

What is the power requirement? Standard 110V with a GFCI-protected receptacle.

Is the eyewash attachment included? It is optional and can be added on request.

Is it suitable for a morgue, autopsy suite or forensic center? Yes. The 304 stainless construction, reverse-flow aspirator, GFCI receptacle and disposer serve hospital pathology and morgue suites, medical examiner and forensic facilities and anatomy labs as well as funeral home preparation rooms.

Are replacement parts available? Yes. Every serviceable part has an AME part number and its own quote-only page; see the replacement parts section below.

2″ drain upgrade for state code

Some states set the drain size for the preparation room. Pennsylvania requires a sink drain with 2-inch capacity (49 Pa. Code §13.174) and Maryland requires a drain pipe of at least 2 inches (COMAR 10.29.03.05). Choose 2″ Drain Upgrade above and the station is built with a 2″ drain outlet so your plumber can connect without reducers. Confirm current rules with your state board and plumbing inspector before you order.

Drain size and local code: we build it to comply

Pennsylvania, Maryland and New Jersey require a 2″ drain in the funeral preparation room, and many cities and counties add their own plumbing rules on top of the state code. We build every plumbing item to the requirement that applies to your room, including 2″ drain outlets, backflow protection and other code items. Select the 2″ Drain Upgrade option on this page, and add anything else in your order notes.

StateRuleRequirement
Pennsylvania49 Pa. Code §13.174Preparation-room sink with a 2″ capacity drain pipe; non-backflow aspirator or non-backflow valve
MarylandCOMAR 10.29.03.05Drain pipe at least 2″ in diameter; floor drainage in new, renovated or newly owned preparation rooms
New JerseyN.J.A.C. 13:36-5.6Waste sink with a 2″ minimum drain; hydro-aspirator with an approved vacuum breaker
Massachusetts239 CMR 3.07Flush-rim sink, floor drain and a reduced-pressure or air-gap backflow device at the meter or property line

How to get a code-compliant build

  1. Ask your plumbing inspector or state board for the required drain size, backflow device and any special fixture rule.
  2. At checkout, type the drain size, your city and county, and any special drain or code requirement in the Order notes box. On a PO or RFQ, put the same details in the notes.
  3. We confirm the build in writing before it ships. Questions: 1-888-792-9315 or po@mymortuarycooler.com.

State rules change. Confirm the current requirement with your inspector before you order. Request a quote · Send a PO

Replacement parts for the Wall Mount Embalming Service Station

Every serviceable part on the 1036-2 station has an AME part number. Match the installed part to the numbered diagram, then open the part page for the detail photo, connection sizes and plumber or electrician notes.

Replacement parts for the Wall Mount Embalming Service Station numbered parts identification diagram

ItemAME part no.Description
1AME-WSS-SPRAYPre-rinse spray valve assembly; head, handle, wall valve
2AME-WSS-SPRAY-HOSE10Flexible spray hose, 10 ft
3AME-WSS-GFCIGFCI duplex receptacle, 20 A, with stainless plate
4AME-WSS-SWDisposer toggle switch, 20 A, with plate
5AME-WSS-ASPDeluxe hydro-aspirator with wall swivel valve; venturi, service kit
6AME-WSS-HOSE-ASP10Clear aspirator hose, 10 ft
7AME-WSS-MIXPressure-balance mixing valve; cartridge, seats and springs, trim
8AME-WSS-FAUCETUtility faucet with 12 in. swing spout; spout only
9AME-WSS-DISPWaste disposer, 3/4 HP, 120 V; sink flange and mounting assembly
10AME-WSS-ZBARZ-bar wall mounting bracket set
11AME-WSS-CONDUITDisposer liquid-tight conduit whip

All AME replacement parts are quote only: open the part page and use Add to Quote, or call 1-888-792-9315 with the model, serial number and part number. Parts carry a one-year warranty with proper use (replacement parts only, no labor); parts sales are final.

Shop the complete Embalming Service Station parts family · Owner and service manual with removal and refit steps (PDF)

Related planning guide

Embalming station planning guide. For operating and service instructions, use this product's model-specific manual rather than the general planning guide.

Ordering Wall Mount Embalming Service Station

Review the listed specifications, selected options and included items before ordering. Use the configuration selector for the current price and availability; do not assume that accessories pictured with a product are included unless the listing says so.

Source funeral supplies and mortuary equipment from one supplier, with nationwide shipping. For an equipment package or a multi-location order, request an itemized quote with the selected products, quantities and delivery ZIP codes. Confirm freight and delivery requirements for the equipment you choose.

Flexible payment options, with clear terms

Review the payment methods offered at checkout for your order. If a payment plan is available, its options and eligibility are shown by the provider. The equipment price and any financing cost are separate; compare the full payment terms before choosing a plan.

Enter payment details only in checkout or the payment provider's application. Use general customer support for product and order questions, not for sending full card numbers or sensitive financing information.

Specifications & product identity

Review Product details for the published product information, and confirm the specifications of your selected configuration before ordering.

Key specifications
Drain Outlet optionsStandard Drain, 2″ Drain Upgrade
Product identity
Brand / vendorAmerican Mortuary Coolers & Equipment
Equipment typeEmbalming Station
ModelAME1036-2

Dimensions & fit

Published dimensions remain in Product details when a separate dimensions section is not available.

FAQs & buying help

How can I ask a question about this product?

Contact our team with the product name and the specification or option you want to confirm.

What should I include when requesting a quote?

Include the product, quantity, required configuration and delivery location in your quote request.

Where can I review shipping and purchase policies?

Open Shipping & support for the published freight, returns and custom-order policy links.

Resources & documents

Product-specific documents and planning links remain in Product details when a separate resources section is not available.

Plan delivery. Review the details.

Review the published policies and confirm product-specific requirements before placing your order.



Wall Mount Embalming Service Station

$7,022.00

Financing & purchase orders

Choose how to pay

Purchase through the product options above, or use one of these support paths for a financed or institutionally quoted order.

For institutions

Formal quotes & purchase orders

Request documented pricing, freight planning, and configuration support before issuing a purchase order.

Request a formal quote
Financing disclosures

Estimates are for qualified buyers with approved credit (WAC) and reflect the equipment price only. Shipping, freight, and applicable taxes are not included and will increase your total and payments. Final amounts are set at checkout or on your quote.

Government and institutional buyers: request a PO quote.