Mortuary Equipment Planning Guides

Roll-In, Side-Load & Vault Mortuary Coolers — Configuration Guide (2026)

Roll-in, side-load, walk-in/vault, and pass-through mortuary cooler configurations explained, with how to choose loading layout by volume, floor space, and...
2 min read
configuration guide

Embalming Tables & Prep Stations — Buyer's Guide for Funeral Homes (2026)

Standard, hydraulic, oversized, folding, and perforated-top embalming tables: how to choose for capacity (including bariatric), drainage, stainless grade, and ergonomics.
2 min read
buyers guide

Cremation Equipment Guide — What Crematories & Funeral Homes Need (2026)

The cold storage, loading lifts, and handling equipment that support a cremation workflow as cremation volume grows, plus how to...
2 min read
buyers guide

Mortuary & Cadaver Lifts — Buyer's Guide to Safe Body & Equipment Lifting (2026)

Hydraulic body lifts, scissor lifts, and transfer aids for mortuaries: how to choose capacity (including bariatric), height range, mobility, and...
2 min read
buyers guide

Religious & Tahara Wash Tables — Buyer's Guide for Funeral Homes & Communities (2026)

What to look for in a ritual wash table: perforated/draining stainless tops, sanitation, working height, and USA-made models for Jewish...
2 min read
buyers guide

Veterinary Necropsy Coolers — Buyer's Guide to Animal & Pet Cold Storage (2026)

How to size, specify, and buy a veterinary necropsy cooler: refrigerated vs. frozen, walk-in vs. reach-in, capacity for companion to...
3 min read
buyers guide

Mortuary cooler not getting cold enough? Causes and fixes

When a mortuary cooler stops holding temperature, the cause is usually a bad door seal, blocked airflow, dirty condenser coils,...
4 min read
BOHN refrigeration

Do you need a permit for a mortuary cooler?

Whether a mortuary cooler needs a permit depends on the unit and your location: plug-in upright coolers usually do not...
3 min read
building permit

How much does a mortuary cooler cost?

A mortuary cooler’s cost is driven by type, capacity, refrigeration, materials, and installation — uprights at the low end, built...
3 min read
buying guide

What size walk-in cooler do I need for a funeral home?

Size a funeral home walk-in cooler by peak simultaneous occupancy — peak caseload times holding time, plus surge headroom —...
3 min read
body storage

How many bodies fit in a walk-in cooler?

A walk-in mortuary cooler’s capacity is set by its racking, not its floor space — multi-tier roller racks can double...
4 min read
body storage

How long can a body stay in a mortuary cooler?

At 36 to 39°F, a body can be held in a mortuary cooler for several days up to about two...
4 min read
body storage

How cold does a morgue cooler get? Mortuary cooler vs. freezer temperature

A morgue cooler holds bodies at 36 to 39°F for short-term storage, while a mortuary freezer runs near 0°F or...
5 min read
body storage temperature

Walk-In Cooler Door Types, Hardware & Access Requirements

Walk-in cooler door specifications are one of the most under-specified elements in institutional cold storage procurement. The wrong door compromises...
3 min read
institutional cold storage access

Walk-In Cooler Energy Efficiency: What Buyers Miss

Walk-in cooler energy efficiency matters a lot more than most buyers realize at purchase time. A walk-in cooler running 24/7/365...
3 min read
efficient cold storage
Show more

Featured collection